What loudness should you target for Trance?
Trance mastering must handle extreme dynamic range — from breakdown silence to full-energy drop. The build-up tension and drop release require precise compression. Trance synths in the 2-6kHz range need brightness without harshness. Target: -8 LUFS for clubs, -14 LUFS for streaming.
Quantara Music's Trance preset sets tone, dynamics, stereo image and loudness for trance production conventions, with a true-peak-safe ceiling at -1 dBTP. The result is a strong starting point for trance releases that you can fine-tune by ear.
How to master your track for Trance
Upload your mix
Create an account (no card needed), then drag and drop your WAV, FLAC or MP3 file into Quantara Studio. Supports files up to 500MB.
Select Trance preset
Click the Trance genre preset. The mastering chain starts from a -8.0 LUFS reference with tone, dynamics and stereo width tuned for this genre.
A/B compare and export
Press Play and flip between Before and After to hear the difference. When you're happy, click Export to download your Trance master in the format your plan includes (WAV, FLAC or MP3), normalised toward -8.0 LUFS with true-peak limiting at -1 dBTP.
Platforms to check for Trance
Check the Trance master against the references of: Beatport, Spotify, SoundCloud, YouTube. The -8.0 LUFS figure is a typical loudness for the genre and a sensible starting point for these platforms — most of them normalise playback, so treat it as a reference rather than a number you must hit.
Why master Trance with Quantara?
A mastering engineer brings trained ears to a release. Quantara gives you a fast, transparent mastering chain tuned for Trance: try it with a free account (1 export with a watermark), then unlimited on the Pro plan at €8.99/month. It is a strong, measurable starting point, not a replacement for a trained engineer's ears on a critical release.
Quantara Music masters with its own engine — no AI model. The Trance starting point is fully adjustable in real time, and every change shows on real LUFS, true-peak and gain-reduction meters, so you can verify what it does.
Quantara Music gives you full control: adjust every control in real time, hear the difference with A/B bypass, and export when you're satisfied. Mastering runs entirely in your browser: your files are not uploaded for mastering.
FAQ — Trance mastering
Yes — master and preview in the studio; a free account includes 1 export with a watermark, no credit card. Exports without a watermark come with Pay Per Track, Pro or Studio. Unlimited exports are available on the Pro plan.
Use -8.0 LUFS integrated as a reference and keep true peak under -1 dBTP; for streaming, Spotify recommends below -2 dBTP for masters louder than -14 LUFS. Master for the song first; most streaming platforms normalise playback, so the reference matters more than chasing a loud number.
Upload WAV, FLAC or MP3 up to 500MB. Export WAV, FLAC or MP3, depending on your plan, normalised toward the Trance reference with true-peak-safe limiting.
Ready to master your track for Trance?
Free account: 1 export with a watermark — no credit card required
Open Quantara Studio →